Vol. 12 No. 5 (2020): Special Issue 2020 : Mechanical Engineering & Covid-19

Published: 09-07-2020

Analysis of the Supply Chain Disruption Risks in the Malaysian Automotive Remanufacturing Industry- a Case Study

Hawa Hishamuddin, Nuramilawahida Mat Ropi, Dzuraidah Abd Wahab

1-11
- PDF 1356
- Abstract View 1148
Bump Energy for Durability Prediction of Coil Spring Based on Local Regularity Analysis

Chuin Hao Chin, Shahrum Abdullah, Salvinder Singh Karam Singh, Ahmad Kamal Ariffin, Dieter Schramm

12-19
- PDF 554
- Abstract View 435
Analysis of Automotive Component Design for Reparation using Additive Manufacturing Technology

Siti Syahara Mad Yusoh, Dzuraidah Abd Wahab, Abdul Hadi Azman

20-26
- PDF 1220
- Abstract View 1004
Assessing the Safety Behaviour of the Bus Express Driving Condition from the Passengers' Perspective

Shahrum Abdullah, Salvinder Singh Karam Singh, Abdul Hadi Azman, Muhamad Razuhanafi Mat Yazid, Hawa Hishamuddin, Wan Aizon Wan Ghopa, Aini Hazwani Shahrir, Ahmad Kamal Ariffin Mohd Ihsan, Dzuraidah Abd. Wahab

27-33
- PDF 905
- Abstract View 695
Improvement of a Lightweight Aluminium Cylinder Block Design Using Finite Element Stress Analysis

Mohamad A Arsah, Syed M A Syed Mohd Yusoff Sobbry, Tengku N A Tuan Kamaruddin, Azmi Osman

34-42
- PDF 929
- Abstract View 588
Integrating Green Affective Values and Materials Selection in Automotive Design: A Preliminary Study

See Junn Wayne, Novita Sakundarini, Christina May May Chin, Raja Ghazilla Raja Ariffin , Sharifah Nadya Syed Azmi

43-54
- PDF 518
- Abstract View 585
Relationship between Driver's Dynamic Pressure Distribution with their Anthropometric Variables on Car Seat under Paved Road

Mohd Faizal Mat Tahir, Nor Kamaliana Khamis, Prof Dr, Nabilah Sabri, Zulaikha Hasani

55-61
- PDF 846
- Abstract View 607
Atomistic investigation on the effect of temperature on mechanical properties of diffusion-welded Aluminium-Nickel

Mohamad Zaenudin, M. N. Mohammed, S. Al-Zubaidi

62-69
- PDF 569
- Abstract View 431
Effect of Including Periodic Boundary Condition on the Fatigue Behaviour of Cancellous Bone

Fatihhi Szali Januddi

70-80
- PDF 535
- Abstract View 549
Fatigue Crack Growth Behaviour of Sandwiched Metal Panel of Aluminium and Mild Steel under Constant Amplitude Loading

A. H. Isahak, M. F. Abdullah, M. K. Faidzi, A. Ali, M. M. Mubasyir

81-90
- PDF 763
- Abstract View 599
Energy Absorption at High Strain Rate of Magnesium Alloy AZ31B

M. M. Mubasyir, M. F. Abdullah, K. Z. Ku Ahmad, R. N. R. Othman, A. H. Isahak

91-96
- PDF 536
- Abstract View 441
Point Absorber Method as Wave Energy Convertor Device for Power Generation: Effect of Buoy Arrangements

M. A. Yussof, N. I. Ismail, M. J. Aiman, M. F. Abdullah, B. A. Gurunathan, M. R. A. Rahman, M. R. Saad

97-103
- PDF 756
- Abstract View 615
Fracture Behavior of RT-PMMA Under Impact Loading

Norazrina Mat Jali, Patrice Longere

104-107
- PDF 632
- Abstract View 343
Sound Velocity Profile (SYP) at Strait of Malacca for Maritime Warfare Usage

Mohd Najib Abdul Ghani Yolhamid, Ainul Husna Abdul Rahman, Mohd Azzeri Mohd Naiem, Mohd Norsyarizad Razali, Mohd Arif Ahmad

108-123
- PDF 626
- Abstract View 366
The Study on Ergonomic Performances Based on Workstation Design Parameters using Virtual Manufacturing Tool

Mohd Iqbal, Iskandar Hasanuddin, Azmi Hassan, Mohd Syafiq Mohd Soufi, Friesca Erwan

124-129
- PDF 1455
- Abstract View 1321
Performances of Jatropha and Waste Cooking Oil Biodiesel Blends Fuel Combustion using Diesel Engine

A. R. Norwazan, N. Norzaima, M. R. A. Rahman, M. S. R. Nasir

130-136
- PDF 607
- Abstract View 440
Prediction of Flow Pattern Behaviour Behind Square Cylinder using Computational Fluid Dynamic (CFD) Approach

N. Nordin, E. Benard, A.H.A Kamal, M.T Ahmad

137-145
- PDF 603
- Abstract View 368
A Review of Surface Texturing in Internal Combustion Engine Piston Assembly

Muhammad Asyraf Mohd Azmi, Wan Mohd Faizal Wan Mahmood, Jaharah A. Ghani, Mohammad Rasidi Mohammad Rasani

146-163
- PDF 1215
- Abstract View 781
Construction of Driving Seat Frame and 2-Dof Motion Simulator

Intan Mastura Saadon

164-170
- PDF 854
- Abstract View 687
Exploring the Impact of Supplier Development Practices on Manufacturing Responsiveness in Malaysia

Rahayu Tukiman

171-177
- PDF 653
- Abstract View 374
Initial Study of Factors on Green Supply Chain Management, Green Supplier Strategy and Work System Performance

Norhafiza Mohamed

178-184
- PDF 590
- Abstract View 361
Mechanical Properties of Epoxy Composites Containing Carbon Black and Graphene

R. N. Othman, I. A. Rahman, M. K. Faidzi, K. Z. Ku Ahmad

185-190
- PDF 909
- Abstract View 409
Development of a Noise Filtering Algorithm for Strain Signals Using the Fast Fourier Transform

Desy Asrina, Teuku Edisah Putra, Husaini Husaini

191-196
- PDF 480
- Abstract View 392
Influence of Pretreatments on Sustainability of Bioethanol Production from Napier Grass

Sutida Marthosa, Wirote Youravong, Ekasit Anancharoenwong

197-202
- PDF 598
- Abstract View 345
Design for Manufacturability (DFM) of 3D Printed Parts Fabricated Using Open Source 3D Printer

Nurul Ain Maidin

203-209
- PDF 844
- Abstract View 585
Preparation and Performance Test of PEFB Reinforced Box Waste Coated Superhydrophobic Coating for Shoe Sole Application

Noraini Marsi

210-216
- PDF 661
- Abstract View 429
Mobile Augmented Reality Hand Wash (MARHw): Mobile Application to Guide Community to Ameliorate Handwashing Effectiveness to Oppose Covid-19 Disease

Hafizul Fahri Hanafi, Mohd Helmy Abd Wahab, Kung-Teck Wong, Abu Zarrin Selamat, Muhamad Hariz Muhamad Adnan, Fatin Hana Naning

217-223
- PDF 1147
- Abstract View 1385
A Partitioning-based Approach for Clustering COVID-19 Drugs and Co-Medication for Safe Use

Ahmad Alqurneh, Aida Mustapha, Nurfadhlina Mohd Sharef

224-232
- PDF 952
- Abstract View 481
Analysis on Preparation, Application, and Recycling of Activated Carbon to Aid in COVID-19 Protection

Md Sumon Reza, ABM Kamrul Hasan, Shammya Afroze, Muhammad S. Abu Bakar, Juntakan Taweekun, Abul K. Azad

233-244
- PDF 2145
- Abstract View 2858
Solid Oxide Fuel Cell (SOFC); A New Approach of Energy Generation during the Pandemic COVID-19

Shammya Afroze, Md Sumon Reza, Quentin Cheok, Juntakan Taweeku, Abul K. Azad

245-256
- PDF 1641
- Abstract View 1206
An Innovative Approach for Environmental Monitoring by Solar Powered Kite

Muhammad Irfan Ishak, Riazul Islam Thakur, Chila Kaewpraek, Yap Boon Kar, Kazi Sajedur Rahman, Kuaanan Techato, Md. Akhtaruzzaman, Sieh Kiong Tiong, Nowshad Amin

257-265
- PDF 493
- Abstract View 962

Vol. 12 No. 5 (2020): Special Issue 2020 : Mechanical Engineering & Covid-19

Analysis of the Supply Chain Disruption Risks in the Malaysian Automotive Remanufacturing Industry- a Case Study

Bump Energy for Durability Prediction of Coil Spring Based on Local Regularity Analysis

Analysis of Automotive Component Design for Reparation using Additive Manufacturing Technology

Assessing the Safety Behaviour of the Bus Express Driving Condition from the Passengers' Perspective

Improvement of a Lightweight Aluminium Cylinder Block Design Using Finite Element Stress Analysis

Integrating Green Affective Values and Materials Selection in Automotive Design: A Preliminary Study

Relationship between Driver's Dynamic Pressure Distribution with their Anthropometric Variables on Car Seat under Paved Road

Atomistic investigation on the effect of temperature on mechanical properties of diffusion-welded Aluminium-Nickel

Effect of Including Periodic Boundary Condition on the Fatigue Behaviour of Cancellous Bone

Fatigue Crack Growth Behaviour of Sandwiched Metal Panel of Aluminium and Mild Steel under Constant Amplitude Loading

Energy Absorption at High Strain Rate of Magnesium Alloy AZ31B

Point Absorber Method as Wave Energy Convertor Device for Power Generation: Effect of Buoy Arrangements

Fracture Behavior of RT-PMMA Under Impact Loading

Sound Velocity Profile (SYP) at Strait of Malacca for Maritime Warfare Usage

The Study on Ergonomic Performances Based on Workstation Design Parameters using Virtual Manufacturing Tool

Performances of Jatropha and Waste Cooking Oil Biodiesel Blends Fuel Combustion using Diesel Engine

Prediction of Flow Pattern Behaviour Behind Square Cylinder using Computational Fluid Dynamic (CFD) Approach

A Review of Surface Texturing in Internal Combustion Engine Piston Assembly

Construction of Driving Seat Frame and 2-Dof Motion Simulator

Exploring the Impact of Supplier Development Practices on Manufacturing Responsiveness in Malaysia

Initial Study of Factors on Green Supply Chain Management, Green Supplier Strategy and Work System Performance

Mechanical Properties of Epoxy Composites Containing Carbon Black and Graphene

Development of a Noise Filtering Algorithm for Strain Signals Using the Fast Fourier Transform

Influence of Pretreatments on Sustainability of Bioethanol Production from Napier Grass

Design for Manufacturability (DFM) of 3D Printed Parts Fabricated Using Open Source 3D Printer

Preparation and Performance Test of PEFB Reinforced Box Waste Coated Superhydrophobic Coating for Shoe Sole Application

Mobile Augmented Reality Hand Wash (MARHw): Mobile Application to Guide Community to Ameliorate Handwashing Effectiveness to Oppose Covid-19 Disease

A Partitioning-based Approach for Clustering COVID-19 Drugs and Co-Medication for Safe Use

Analysis on Preparation, Application, and Recycling of Activated Carbon to Aid in COVID-19 Protection

Solid Oxide Fuel Cell (SOFC); A New Approach of Energy Generation during the Pandemic COVID-19

An Innovative Approach for Environmental Monitoring by Solar Powered Kite

Make a Submission

info

journalsofuthm

index

Latest publications

Counter