Vol. 11 No. 7 (2019): Special Issue 2019: Mechanical Engineering

Editorial

• Editorial Preface

  Al Emran Ismail; Nabilah Ibrahim, Riduan Yunus

  0-0

  • PDF 310
  • Abstract View  616

• Ethereum Blockchain Network Implementation for IoT Platform

  Mohamad Hafizat Zainal Abidin, Saravid Suchaad, Koichiro Mashiko, Nordinah Ismail

  1-6

  • PDF 1103
  • Abstract View  640

• Identification and Assessment of Fluroquinolone Multidrug Efflux Pump in Multidrug Resistant Staphylococcus aureus isolated from Hospital Wastewater in Kuala Lumpur

  Siti Norayuni Mohd Zulkeflle, NurFarahaida Mustafa, Nor'azizi Othman, Hirofumi Hara

  7-13

  • PDF 650
  • Abstract View  578

• The Effects of Induction Motor's Steel Sheet Thickness on Efficiency, Losses and Electrical Cost

  Yanawati Binti Yahya, Mohd Khairil Rahmat, Siti Fatihah Salleh, Tuan Ab Rashid Tuan Abdullah

  14-19

  • PDF 1243
  • Abstract View  445

• A Liquefaction Resistance of Sand-Fine Mixtures: Short Review with Current Research on Factors Influencing Liquefaction Resistance

  Bakhtiar Affandy Othman, Aminaton Marto

  20-30

  • PDF 1025
  • Abstract View  545

• Accelerating Extreme Learning Machine on FPGA by Hardware Implementation of Given Rotation - QRD

  Chong Yeam Tan, Nordinah Ismail, Chia Yee Ooi, Jin Yong Hon

  31-39

  • PDF 846
  • Abstract View  494

• Effect of doping profile and the work function variation on performance of double-gate TFET

  Muhammad Elgamal, Aya Sinjab, Mostafa Fedawy, Ahmed Shaker

  40-46

  • PDF 945
  • Abstract View  590

• A Strategic Roadmap for Maximizing Big Data Return

  Manal A. Abdel-Fattah, Yehia Helmy, Thanaa Mohamed Hassan

  47-60

  • PDF 1061
  • Abstract View  494

• Automatic Face and Hijab Segmentation Using Convolutional Network

  Dina M. Madkour, Madani Ahmed, Waleed Fakhr Mohamed

  61-66

  • PDF 906
  • Abstract View  632

• Shinyei Based Sensor with Added Roof Enhanced Detection of Indoor Particulate Matter

  Nur Atiqah Surib, Fathihah Nabila Mohammad Azlan, NorRuwaida Jamian, Mohd Rashid Mohd Yusof, Khairunnisa Mohd Paád, Wuled Lenggoro

  67-76

  • PDF 691
  • Abstract View  558

• Fabrication of hydrophilic silica coating varnish on pineapple peel fiber based biocomposite

  Zatil Izzah Tarmizi, Anisa Nasuha Maski, Roshafima Rasit Ali, Nurfatehah Wahyuny Che Jusoh, Abdah Md Akim, Zolkapli Eshak, Sabariah Md Noor, Norazana Ibrahim

  77-82

  • PDF 771
  • Abstract View  658

• Prediction and Optimization of Compressive Load of a Green Composite Material from Natural Fiber Using Statistical Approach

  Anayet U Patwari, S. Alam Bhuiyan, Qumrul Ahsan, Iftakhar H. Khan, Nihon H. Khan

  83-89

  • PDF 618
  • Abstract View  389

• Composition and Type of a Binder Effects on the Stainless Steel Foam Microstructure Prepared by Sponge Replication Method

  Fazimah Mat Noor, Muhamad Iqbar Abu Bakar, Zaleha Mohamad, Al Emran Ismail, Maznan Ismon, Sufizar Ahmad, Hamani Abd Wahab, Nor Mazlana Main, Shahmir Hayyan Sanusi

  90-94

  • PDF 813
  • Abstract View  841

• Evaluation of corrosion product formed on carbon steel in recycled sour water of overhead system

  Azzura Ismail, Syamimi Mahari, Firdaus Shamsuddin, Norhariti Hasan, Nursyazwani Ramli

  95-101

  • PDF 776
  • Abstract View  441

• Distribution of Mode I Stress Intensity Factors for Single Circumferential Semi-Elliptical Crack in Thick Cylinder

  Omar Mohammed, Al Emran Ismail, AK Kareem, Saifulnizan Jamian, MN Nemah

  102-111

  • PDF 866
  • Abstract View  909

• Failure Mechanism of Two-Phase Syntactic Foam Polymer Composites under Different Coating Conditions

  Lukmon Owolabi Afolabi, Zulkifli Mohamad Ariff, Nor Azaniza Abdul Mutalib

  112-121

  • PDF 723
  • Abstract View  390

• Effect of fiber loading on the flexural and tensile strength of oil palm frond fiber reinforced polymer composite

  Beatrice Dimah Richard, Azizah Wahi, Rozie Nani, Elisha Lling, Shahril Osman, Dayang Siti Hazimmah Ali

  122-128

  • PDF 1272
  • Abstract View  563

• Investigation on Dynamics Characteristic of Multilayer Steel Plate Impacted by Projectile

  Mohd Norihan Ibrahim, Uma Isma Samian, Kamarul-Azhar Kamarudin, Al Emran Ismail, Saifulnizan Jamian, Mohd Khir Mohd Nor, Muhamad Khairudin Awang, Waluyo Adi Siswanto

  129-136

  • PDF 579
  • Abstract View  682

• The Preparation and Characterization on Natural Dyes Based on Neem, Henna and Turmeric for Dyeing on Cotton with Superhydrophobic Coating

  Rupashinii Thana Singam, Noraini Marsi, Hasri Mamat, Anika Zafiah Mohd Rus, Nor Mazlana Main, Nur Athirah Huzaisham, Muhammad Haikal Mohd Fodzi

  137-143

  • PDF 1516
  • Abstract View  777

• Road Profile Identification by Genetic Algorithm with Multistage Search using Vibration Response of a Quarter Vehicle Model

  P Jeenkour, Kittipong Boonlong

  144-151

  • PDF 659
  • Abstract View  492

• Design and Analysis of Carbon Fibre Composite Monorack Arm for Motorcycle

  Amar Ridzuan Abd Hamid, T Jagan

  152-161

  • PDF 2131
  • Abstract View  773

• Effect of SSC Loading on the Microstructural Stability SSC-SDCC Composite Cathode as New Potential SOFC

  Siti Fairus Mohammad, Sufizar Ahmad, Hamimah Abdul Rahman, Andanastuti Muchtar

  162-168

  • PDF 716
  • Abstract View  556

• Effect of Ag Addition on the Structural Properties of Ba0.5Sr0.5Co0.8Fe0.2O3-?–Sm0.2Ce0.8O1.9 Composite Cathode Powder

  Umira Asyikin Yusop, Hamimah Abd.Rahman, Tan Kang Huai

  169-174

  • PDF 568
  • Abstract View  523

• Platinum-Free Electrocatalyst for Oxygen Reduction Reaction Derived from the Direct Pyrolysis of Waste Watermelon Peels

  Via Kryshl Ranillo Matibag, Hannah Grace Defeo Geronimo, Jonyl Lomigo Garcia, Bernard John Vallejos Tongol

  175-181

  • PDF 817
  • Abstract View  761

• Effect of Temperature and Current Density on Hydrogen Production for Polybenzimidazole Zirconium Phosphate Hybrid Membrane in Copper Chloride Electrolysis

  Mohd Fadhzir Ahmad Kamaroddin , Nordin Hj. Sabli, Tuan Amran Tuan Abdullah, Luqman Chuah Abdullah, Shamsul Izhar Siajam, Adnan Ripin, Arshad Ahmad

  182-189

  • PDF 907
  • Abstract View  556

• Synthesis, Characterization and Potential of Pt-Ru Supported Carbon Nanocage (CNC) for Methanol Oxidation Reaction (MOR) and DMFC Application

  Zatil Amali Che Ramli, Siti Kartom Kamarudin, Azran Mohd Zainoodin, Sahriah Basri

  190-200

  • PDF 656
  • Abstract View  543

• Fabrication and Characterization of YSZ/ScSZ bilayer electrolyte for Intermediate Temperature-Solid Oxide Fuel Cell (IT-SOFC) Application

  Zuraida Awang Mat, Shri Kumaran Nadaraja, Zulfirdaus Zakaria, Saiful Hasmady Abu Hassan, Yap Boon Kar, Chou Yong Tan, Mahendra Rao Somalu

  201-208

  • PDF 955
  • Abstract View  643

• Catalytic Steam Reforming of Toluene for Hydrogen Production over Nickel-Cobalt Supported Activated Carbon

  Hamdya Sabrina Mohidin Yahya, Nor Aishah Saidina Amin

  209-218

  • PDF 815
  • Abstract View  654

• Kinetic Model of Thermophilic Biohydrogen Production from POME

  Jamaliah Md. Jahim, Peer Mohamed Abdul, Chen-Yeon Chu, Shu-Yii Wu, Mohd Sobri Takriff, Shuhaida Harun

  219-232

  • PDF 895
  • Abstract View  615

• Finite Element Analysis for Stress Distribution in a Proton Exchange Membrane Fuel Cell Stack

  Nurato, Edy Herianto Majlan, Wan Ramli Wan Daud, Teuku Husaini, Masli Irwan Rosli, Abu Bakar Sulong, Darwin Sebayang

  233-240

  • PDF 1174
  • Abstract View  628

• Density Functional Theory Studyof Water Adsorption on the CoO (100) and CoO (110) Surfaces

  Salihah Azemi, Khuzaimah Arifin, Rozan Mohamad Yunus, Sharifah Najiha Timmiati

  241-246

  • PDF 780
  • Abstract View  623