Vol. 11 No. 5 (2019): Special Issue 2019: Mechanical Engineering

• Evaluating the effect of the pin's length to the strength of double sides friction stir welded aluminum

  Djarot Bangun Darmadi, Annisha Mentary, E.M. Yusup, S. Mahzan

  1-11

  • PDF 971
  • Abstract View  677

• The Performance Characteristics of The Low Head Cross Flow Turbine Using Nozzle Roof Curvature Radius Centered on Shaft Axis

  Djoko Sutikno, Rudy Soenoko, Sudjito Soeparman, Slamet Wahyudi, M. Azham Azmi

  12-22

  • PDF 1419
  • Abstract View  544

• The Effect of Electrophoretic Deposition Current to Tinplate Coating with Chitosan

  Femiana Gapsari, Putu H. Setyarini, Erfinda F. Fajrin

  23-28

  • PDF 775
  • Abstract View  611

• Optimum Design of Laminated Corrugated Metal Gasket Using Computer Simulation

  Shigeyuki Haruyama, Moch. Agus Choiron, Didik Nurhadiyanto

  29-34

  • PDF 769
  • Abstract View  658

• Comparison between Dry, MQL, and Cryogenic Cooling Technique on Surface Integrity of Burnished Surface

  Haris Rachmat, Khairuddin Mahalil, Erween Abd Rahim, Zazuli Mohid

  35-41

  • PDF 1217
  • Abstract View  593

• Evaluation of Varies Model Order in GA-Optimized Parameter Estimation of Toothbrush Rig System

  H. M. Y. Ainul, S. Mahzan, S. Ahmad, H. Taib, H. A. Rahman, A. Ismail, A. Ismail, S. M. Saleh

  42-50

  • PDF 519
  • Abstract View  470

• The Effect of Shot Peening Configurations on Residual Stress of Aluminium 5052

  Khairul Anam, Anindito Purnowidodo

  51-57

  • PDF 685
  • Abstract View  453

• The Role of the University in the Implementation of Eco-Innovation at the Creative Industry Center of Natural Stone Crafts

  Murti Astuti, Pratikto Prawoto, Yudy Surya Irawan, Sugiono Sugiono, S. M. Saleh

  58-65

  • PDF 753
  • Abstract View  523

• The Addition Effect of Rhodium (III) Sulfate and Clove Oil on the Combustion Characteristics of Castor Oil Droplet

  Purnami Purnami, I.N. G. Wardana, Nurkholis Hamidi, Mega Nur Sasongko, Djarot B. Darmadi

  66-71

  • PDF 698
  • Abstract View  561

• Effect of Bio-based Adhesive on Tensile Strength and Bending of Balsa Wood Adhesive Joint

  Moch. Syamsul Ma'arif, Resza Tania Putri, Khairul Anam

  72-79

  • PDF 4965
  • Abstract View  5294

• Synthesis and Characterization of Visible Light Active Fe-TiO2 using Hydrothermal Method

  Siti Aida Ibrahim, Mohamad Khairul Anwar, Ainun Rahmahwati Ainuddin, Azian Hariri, Anika Zafiah M.Rus, Zakiah Kamdi, Muhamad Zaini Yunos, Zawati Harun

  80-85

  • PDF 1050
  • Abstract View  918

• Establishment of method for identification of water quality in fire-tube boiler - a case study for UTHM Biodiesel Plant's Boiler

  Nik Muhammad Akif Nik Muhamad Kamal, Nurul Fitriah Nasir, Muhammad Affifudin Abdul Patar, Mohamad Farid Sies, Azian Hariri, Norasikin Mat Isa, Normayati Nordin, Wan Saiful Islam Wan Salim

  86-96

  • PDF 1298
  • Abstract View  750

• Dust Exposure Monitoring: Abrasive Blasting Dust from Cleaning Process in Marine Industry

  Hanis Zakaria, Mohamad Khairul Hafiz Mohd Katman, Muhammad Nur Hidayat Mat, Mohamad Farid Sies, Norzelawati Asmuin

  97-101

  • PDF 1534
  • Abstract View  654

• Mechanical Properties of PCL/PLA Composite Sample Produce from 3D Printer and Injection Molding

  Reazul Haq Abdul Haq, Ishkrizat Taib, Mohd Nasrull Abdol Rahman, Ho Fu Haw, Haslina Abdullah, Said Ahmad, Ahmad Mubarak Tajul Ariffin, Mohd Fahrul Hassan

  102-108

  • PDF 1189
  • Abstract View  1017

• Asymptotic Computational Fluid Dynamic (ACFD) Study of Three-Dimensional Turning Diffuser Performance by Varying Angle of Turn

  Wei Xian Tham, Normayati Nordin, Azian Hariri, Nurul Fitriah Nasir, Norasikin Mat Isa, Musli Nizam Yahya, Suzairin Md. Seri

  109-118

  • PDF 784
  • Abstract View  559

• Rheological and thermodynamic behaviour of PSf/ZnO: Effect of zinc oxide

  Mohamad Luqman Harith Abu Mansor, Muhamad Zaini Yunos, Zawati Harun, Mohamed Nasrul Mohamed Hatta, Rosniza Hussin, Azlinnorazia Ahmad, Aina Syazwana Zulkefli

  119-125

  • PDF 808
  • Abstract View  583

• Lung Function Test among Abrasive Blasting Workers in Lumut, Perak

  Hanis Zakaria, Muhammad Faris Fauzy, Mohamad Farid Sies, Mohamad Nur Hidayat Mat, Suhaimi Hassan, Norzelawati Asmuin

  126-132

  • PDF 722
  • Abstract View  551

• Evaluation of Industrial Workplace Exposure to Metal Fumes using Toenail as Bio-Indicator

  Siti Farhana Zainal Bakri, Azian Hariri, Marzuki Ismail, Amir Abdullah Muhamad Damanhuri

  133-139

  • PDF 1166
  • Abstract View  668

• Indoor Air Concentration from Selective Laser Sintering 3D Printer using Virgin Polyamide Nylon (PA12) Powder: A Pilot Study

  Amir Abdullah Muhamad Damanhuri, Azian Hariri, Mohd Rizal Alkahari, Muhammad Hafidz Fazli Md Fauadi, Siti Farhana Zainal Bakri

  140-149

  • PDF 1410
  • Abstract View  1201

• In-Situ Synthesis of Silver Nitrate incorporated with Polysulfone Membrane Characterization: Effect of Ag Precursor

  Azlinnorazia Ahmad, Muhamad Zaini Yunos

  150-156

  • PDF 692
  • Abstract View  483

• The Proposed Dashboard Model for Measuring Performance of Small-Medium Enterprises (SME)

  Taufiq Immawan, Annisa Indah Pratiwi, Winda Nur Cahyo

  167-173

  • PDF 1919
  • Abstract View  1752

• Effect of Strain Rates on Tensile Behavior of Kenaf Fiber and Rice Husk Silica Reinforced Polypropylene Composites

  Noradila Abdul Latif, Nurul Farahin Mohd Joharudin

  174-179

  • PDF 702
  • Abstract View  429

• The Effect of Leadership on Employee Performance with Total Quality Management (TQM) as a Mediating Variable in Indonesian Petroleum Companies: A Case Study

  Wagimin Wagimin, Elisa Kusrini, Juhary Ali, Vembri Noor Helia

  180-188

  • PDF 1553
  • Abstract View  1072

• Lean Service Approach for Consulting Services Company

  Elisa Kusrini, Fathia Nisa, Vembri Noor Helia

  189-195

  • PDF 1864
  • Abstract View  1445

• Research in Industrial Marketing: Issues and Opportunities Classification

  Qurtubi Qurtubi, Elisa Kusrini

  196-203

  • PDF 1519
  • Abstract View  940

• User Acceptance Model for Assessing Trust on Electronic Transaction Succession

  Yusuf Durachman, Herlino Nanang, Ahmad F Misman, Zahidah Zulkifli

  204-210

  • PDF 783
  • Abstract View  535

• Solving for an Optimal Batch Size for a Single Machine Using the Closed-form Equations to Minimize Inventory Cost

  Athapol Ruangkanjanases, Nithiphong Vikitset

  211-221

  • PDF 902
  • Abstract View  468

• Data-Based Maintenance Strategy Analysis using Operational Excellence Approach in Engineering Asset Management

  Winda Nur Cahyo, Haryo Prawahandaru, Bayu Agung Swasono, Riza Said Isyak Raben, Riyan Tri Sutartono, Taufiq Immawan

  222-228

  • PDF 925
  • Abstract View  745

• The Ability of Crystalline and Amorphous Silica from Rice Husk Ash to Perform Quality Hardness for Ceramic Water Filtration Membrane

  Nur Saadah Zainal, Zaleha Mohamad, Mohammad Sukri Mustapa, Nur Azam Badarulzaman, Abdullah Zulfairis Zulkifli

  229-235

  • PDF 1660
  • Abstract View  1303

Editorial

• Editorial Preface

  Al Emran Ismail; Nabilah Ibrahim, Riduan Yunus

  0-0

  • PDF 321
  • Abstract View  581