Vol. 11 No. 6 (2019)

Editorial

• Editorial Preface

  Al Emran Ismail, Nabilah Ibrahim, Riduan Yunus

  0-0

  • PDF 287
  • Abstract View  532

• Study of Corrosion Penetration Rate on Composite Materials EN AC-43100 (AlSi10Mg (b)) + SiC*

  Prantasi Harmi Tjahjanti, Darminto Darminto, Wibowo Harso Nugroho, Andita N.F. Ganda

  1-9

  • PDF 3970
  • Abstract View  811

• Impact of Surface Treatment of Flax Fibers on Tensile Mechanical Properties Accompanied by a Statistical Study

  Azzedine Bedjaoui, Ahmed Belaadi, Salah Amroune, Belgacem Madi

  10-17

  • PDF 849
  • Abstract View  863

• Environmentally Friendly Approaches Assisted Machining of Aluminum Alloy 7075-T6 for Automotive Applications: A Review

  MZA Yazid, Azreen Zainol

  18-26

  • PDF 1412
  • Abstract View  1323

• Investigation of Temperature and Humidity Control System for Mushroom House

  Hanani Abd Wahab, Muhamad Zariq Imran Abdul Manap, Al Emran Ismail, Ong Pauline, Maznan Ismon, Muhd Hafeez Zainulabidin, Fazimah Mat Noor, Zaleha Mohamad

  27-37

  • PDF 1661
  • Abstract View  1909

• Fabrication and Characterization of Nanocrystalline Hydroxyapatite Extracted from Bovine Bone at Different Calcination Temperatures

  Nazia Bano, Suzi Salwah, Hatijah Basri, Sharifah Adzila, Nasir Shuaib

  38-44

  • PDF 719
  • Abstract View  537

• Comprehensive Comparisons of Two and Three Dimensional Numerical Estimation of Stress Intensity Factors and Crack propagation in Linear Elastic Analysis

  Abdulnaser Mohammed Alshoaibi

  45-52

  • PDF 1168
  • Abstract View  785

• The Influence of Hand Tool Design on Hand Grip Strength: A Review

  Isa Halim, Radin Zaid Radin Umar, Muhammad Syafiq Syed Mohamed, Nadiah Ahmad, Vinothini Padmanathan, Adi Saptari

  53-69

  • PDF 2517
  • Abstract View  2369

• Effect of Stitching Patterns on Tensile Strength of Kenaf Woven Fabric Composites

  Mohd Yuhazri Yaakob, Mohd Amirhafizan Husin, Abu Abdullah, Kamarul Amir Mohamed, Ang Siew Khim, Michelle Lye Chuok Fang, Haeryip Sihombing

  70-79

  • PDF 1174
  • Abstract View  860

• A Bi-Objective Programming Model for Reliable Supply Chain Network Design Under Facility Disruption

  Seyed Morteza Hatefi, Seyed Mohtasham Moshashaee, Iraj Mahdavi

  80-92

  • PDF 925
  • Abstract View  779

• Effect of Marble Particle on Physico-Mechanical behaviour of Glass Fiber Reinforced Epoxy Composites

  Subhrajit Ray

  93-102

  • PDF 703
  • Abstract View  543

• Estimation of Global Solar Radiation on Horizontal Surface in Kano, Nigeria Using Air Temperature Amplitude.

  Mustapha Mudasiru

  103-109

  • PDF 737
  • Abstract View  483

• High Voltage Gain of Non-Isolated Inductor-Less DC-DC Converter

  Asmarashid Ponniran

  110-118

  • PDF 746
  • Abstract View  481

• Application of Electrical Resistance Tomography in an Oscillatory Baffled Column for Gas-Liquid Two-Phase Flow

  Ruzairi Abdul Rahim, Ahmad Azahari Hamzah, Mohd Sobri Takriff, Elmy Johana Mohamad, Jaysuman Pusppanathan, Intan Norjahan Azman, Mohd Syazwan Mohd Ghazali, Mohamad Zulkeflee Sabri, Faridah Ghafar, Mohd Nizam Zahari

  191-125

  • PDF 624
  • Abstract View  497

• Passive Islanding Detection Technique for Integrated Distributed Generation at Zero Power Balanced Islanding

  Ch Rami Reddy, K Harinadha Reddy

  126-137

  • PDF 799
  • Abstract View  652

• A Survey on Vertical and Horizontal Scaling Platforms for Big Data Analytics

  Ahmed Hussein Ali

  138-150

  • PDF 2205
  • Abstract View  2346

• Design Optimization of Reflectarray Antenna Fabricated above Paper Based Substrate Materials

  Hasan Ijaz Malik, Muhammad Yusof Ismail, Muhammad Hezri Mokhtar

  151-158

  • PDF 593
  • Abstract View  402

• Effect of Randomized PI Controller in Off Grid Network

  Suriana binti Salimin

  159-165

  • PDF 518
  • Abstract View  352

• An Overview of Electrical Characterization Techniques for Biological Cell

  Abdul Hafiz Mat Sulaiman, Ida Laila Ahmad, Ruzairi Abdul Rahim, Jaysuman Pusppanathan, Dirman Hanafi, Elmy Johana Mohamad, Mohd Fadzli Abd Shaib, Pei Ling Leow, Yasmin Abdul Wahab, Suzanna Ridzuan Aw

  166-175

  • PDF 635
  • Abstract View  610

• PI, Fuzzy Based Controllers for FACTS Devices in Grid Connected PV System

  raghu thumu

  176-185

  • PDF 621
  • Abstract View  559

• Design and Simulation of Single Electron Transistor based SRAM and its Memory Controller at Room Temperature

  Rutu Parekh

  186-195

  • PDF 1064
  • Abstract View  702

• Microaneurysms Detection using Blob Analysis for Diabetic Retinopathy

  Haniza Yazid

  196-203

  • PDF 481
  • Abstract View  394

• Peat Stabilization by Using Sugarcane Bagasse Ash (SCBA) as a Partial Cement Replacement Materials

  Nazatul Simaa Kamaruidzaman, Mohd Khaidir Abu Talib, Nurul Amirah Alias, Zainorabidin Adnan, Aziman Madun, Hazreek Zainal Abidin, Mohd Firdaus Md Dan

  204-213

  • PDF 1114
  • Abstract View  768

• Assessing River Stability and Hydraulic Geometry of Fluvial River in Malaysia

  Nor Azidawati Haron

  214-223

  • PDF 968
  • Abstract View  627

• Evaluation of Steel Stairwell Dynamic Characteristics, Under Few Mass Configurations Using Ambient Vibration Method

  Ahmad Fahmy Kamarudin

  224-235

  • PDF 575
  • Abstract View  414

• Coagulation-Flocculation of Leachate by Using Single Coagulant Made from Chemical Coagulant (Polyaluminium Chloride) and Natural Coagulant (Tapioca Flour)

  Nur Shaylinda Mohd Zin, Taruunen Ramarao, Mohd Hazreek Zainal Abidin, Wan Afnizan Wan Mohamed

  236-243

  • PDF 977
  • Abstract View  638

• Relationship Between Rheological Properties of Nano Polymer Modified Asphalt Binder and Permanent Deformation of Asphalt Mixture

  Ekarizan Shaffie, Juraidah Ahmad, Ahmad Kamil Arshad, Ramadhansyah Putra Jaya, Nuryantizpura Mohamad Rais, Mohd Amin Shafii

  244-253

  • PDF 1104
  • Abstract View  788

• The Relationship Between Children Education in the Family and Car Driving and Motorcycle Riding Behaviour in Indonesia

  Leksmono Suryo Putranto, Yendi Fajar Alyandi

  254-267

  • PDF 998
  • Abstract View  695

• Mesophilic Anaerobic Co-Digestion of Fruit and Vegetable Waste and Domestic Primary Sewage Sludge: Performance and Kinetic

  Roslinda Seswoya

  268-273

  • PDF 791
  • Abstract View  588

• Potential of Tyre Derived Geomaterial as Alternative Material in Gabion Type Retaining Wall

  Amizatulhani Abdullah

  274-284

  • PDF 1008
  • Abstract View  566

• Density and Strength of Foamed Concrete: The Influence on Dynamic Characteristics of Lightweight Profiled Composite Slabs

  Rahmat Hidayat Mohammed Rum, Arnie Farhana Norhalim, Zainorizuan Mohd Jaini, Nor Hayati Abd Ghafar, Marcin Kowlowski

  285-295

  • PDF 681
  • Abstract View  591

• Analysis of The Driving Forces of Urban Expansion in Luxor City by Remote Sensing Monitoring

  Hatem Mahmoud, Remon Alfons, Rabee M. Reffat

  296-307

  • PDF 978
  • Abstract View  1212