Vol. 10 No. 3 (2018): Special Issue 2018: Seminar on Postgraduate Study

Published: 01-07-2018

Editorial

Editorial Preface

Al Emran Ismail, Nabilah Ibrahim, Zawawi Daud
- PDF 279
- Abstract View 2194

Special Issue 2018: Center for Graduate Studies

An Enhanced Partial Transmit Sequence Based on Combining Hadamard Matrix and Partitioning Schemes in OFDM Systems

yasir amer jawhar, Khairun Ramli, Montadar Taher, Lukman Audah, Nor Shahida Shah, Mustafa Ahmed, Ahmed Hammoodi
- PDF 866
- Abstract View 843
Design and Development of a Non-volatile Counter for Metered Dose Inhaler (MDI)

Tsen Vui Hin, Nur Ilyani Ramli
- PDF 655
- Abstract View 730
Real-Time High Jump Wearable Device with ESP8266 for High-Performance and Low-Injury

Muhammad Faris Roslan, Afandi Ahmad, Abbes Amira
- PDF 1006
- Abstract View 899
A 2x2 Bit Multiplier Using Hybrid 13T Full Adder with Vedic Mathematics Method

Shing Jie Lee, Siti Hawa Ruslan
- PDF 1170
- Abstract View 860
Joint Transmit Antennas for Energy Efficiency in Downlink Massive MIMO Systems

Adeeb Salh, Lukman Audah, Nor Shahida Mohd Shah, Shipun Anuar Hamzah
- PDF 720
- Abstract View 571
A Novel Algorithm for Human Fall Detection using Height, Velocity and Position of the Subject from Depth Maps

Yoosuf Nizam, Muhammad Mahadi Abdul Jamil, Mohd Norzali Haji Mohd, Mansour Youseffi, M. C. T. Denyer
- PDF 740
- Abstract View 645
Feature Analysis of Kidney Ultrasound Image in Four Different Ultrasound using Gray Level Co-occurrence Matrix (GLCM) and Intensity Histogram (IH)

Nurul Aimi Shaharuddin, Wan Mahani Hafizah Wan Mahmud
- PDF 863
- Abstract View 647
Physical and Chemical Properties of Anodised Titanium in Sulphuric Acid for Biomedical Application

Mohamad Ali Selimin, Lee Te Chuan, Maizlinda Izwana Idris, Hasan Zuhudi Abdullah
- PDF 755
- Abstract View 701
The Effect of Microstructures and Hardness Characteristics of Recycling Aluminium Chip AA6061/Al Powder On Various Sintering Temperatures

Muhammad Irfan Ab Kadir, Mohammad Sukri Mustapa, Nurul Liyana Rosli, Mohd Shahir Yahya, Mahmod Abd Hakim Mohamad, Abd Khalil Abd Rahim
- PDF 849
- Abstract View 816
Investigation on the Tribological Behaviour of Modified Jatropha Oil with Hexagonal Boron Nitride Particles as a Metalworking Fluid for Machining Process

Norfazillah Talib, Ramdziah Md Nasir, Erween Abdul Rahim
- PDF 883
- Abstract View 691
Influence of Friction Stir Process on Microstructure and Tensile Properties of LM28 Hypereutectic Al-Si Alloy

Samir Sani Abdulmalik, Rosli Ahmad
- PDF 665
- Abstract View 565
Comparative Study on the Malaysian Sustainable Building Assessment Tools

Abdullahi Mohammed Usman, Mohammad Kamil Abdullah
- PDF 1621
- Abstract View 3608
Effect of Sintering on Hydroxyapatite/Sodium Alginate Properties

Nanthini Kanasan, Sharifah Adzila Syed Abu Bakar, Nor Azimah Mustaffa, Mohd Nasrull Abdol Rahman, Mohd Fahrul Hassan, Gurubaran Panerselvan
- PDF 816
- Abstract View 909
Effect of Sintering Temperature and AR Glass Addition towards Physical Properties of Porcelain Ceramic for Sewer Pipes Application

Muhammad Ikhmal, Sufizar Ahmad, Hariati Taib, Tan Chee Chen
- PDF 791
- Abstract View 497
CNG-Diesel Dual Fuel Controlling Concept for Common Rail Diesel

Muammar Mukhsin Ismail, Mas Fawzi Mohd Ali, Abd Fathul Hakim Zulkifli, Shahrul Azmir Osman
- PDF 850
- Abstract View 814
Taguchi design and flower pollination algorithm application to optimize the EMI shielding of plaster mortar containing palm oil fuel ash

Narong Oh Lai Ching, Chee Kiong Sia, See Khee Yee, Pauline Ong, Azlan Zainudin, Nik Hisyamudin Muhd Nor, Mohd Fahrul Hassan
- PDF 847
- Abstract View 780
In Vitro Apatite Deposition on TiO2 Film Derived from Electro-Chemical Treatment on Ti Substrate under Mixed Acid Electrolyte

Saleh S Saleh Elfallah, Hasan Zuhudi Abdullah
- PDF 611
- Abstract View 439

Vol. 10 No. 3 (2018): Special Issue 2018: Seminar on Postgraduate Study

Editorial

Editorial Preface

Special Issue 2018: Center for Graduate Studies

An Enhanced Partial Transmit Sequence Based on Combining Hadamard Matrix and Partitioning Schemes in OFDM Systems

Design and Development of a Non-volatile Counter for Metered Dose Inhaler (MDI)

Real-Time High Jump Wearable Device with ESP8266 for High-Performance and Low-Injury

A 2x2 Bit Multiplier Using Hybrid 13T Full Adder with Vedic Mathematics Method

Joint Transmit Antennas for Energy Efficiency in Downlink Massive MIMO Systems

A Novel Algorithm for Human Fall Detection using Height, Velocity and Position of the Subject from Depth Maps

Feature Analysis of Kidney Ultrasound Image in Four Different Ultrasound using Gray Level Co-occurrence Matrix (GLCM) and Intensity Histogram (IH)

Physical and Chemical Properties of Anodised Titanium in Sulphuric Acid for Biomedical Application

The Effect of Microstructures and Hardness Characteristics of Recycling Aluminium Chip AA6061/Al Powder On Various Sintering Temperatures

Investigation on the Tribological Behaviour of Modified Jatropha Oil with Hexagonal Boron Nitride Particles as a Metalworking Fluid for Machining Process

Influence of Friction Stir Process on Microstructure and Tensile Properties of LM28 Hypereutectic Al-Si Alloy

Comparative Study on the Malaysian Sustainable Building Assessment Tools

Effect of Sintering on Hydroxyapatite/Sodium Alginate Properties

Effect of Sintering Temperature and AR Glass Addition towards Physical Properties of Porcelain Ceramic for Sewer Pipes Application

CNG-Diesel Dual Fuel Controlling Concept for Common Rail Diesel

Taguchi design and flower pollination algorithm application to optimize the EMI shielding of plaster mortar containing palm oil fuel ash

In Vitro Apatite Deposition on TiO2 Film Derived from Electro-Chemical Treatment on Ti Substrate under Mixed Acid Electrolyte

info

journalsofuthm

index

Latest publications

Counter