Vol. 10 No. 1 (2018)

Editorial

• Editorial Preface

  Al Emran Ismail, Zawawi Daud, Nabilah Ibrahim

  • PDF 454
  • Abstract View  754

• Concrete Incorporated With Optimum Percentages of Recycled Polyethylene Terephthalate (PET) Bottle Fiber

  Shahiron Shahidan

  • PDF 2834
  • Abstract View  2498

• Utilization of Water Turbidity Meter Devices in Estimating the Aggregate Stability of Many Artificially Stabilized Soils

  Ghazi Maleh Mutter

  • PDF 847
  • Abstract View  662

• Laminated Veneer Lumber (LVL) Sengon: An Innovative Sustainable Building Material in Indonesia

  Ali Awaludin, Shahiron Shahidan, Achmad Basuki, Sharifah Salwa Mohd Zuki, Fadzli Mohamed Nazri

  • PDF 1534
  • Abstract View  1585

• A Comparative Evaluation of Snow Depth and Snow Water Equivalent Using Empirical Algorithms and Multivariate regressions

  Arash Adib, Arash Zaerpour, Ali Motamedi

  • PDF 630
  • Abstract View  474

• A New Method towards Achieving FES-Induced Movement

  Mohammed Ahmed

  • PDF 585
  • Abstract View  499

• Non-Destructive Oil Palm Fresh Fruit Bunch (FFB) Grading Technique Using Optical Sensor

  Sebastian Liban Utom, Elmy Johana Mohamad, Ruzairi Abdul Rahim, Noorfarahane Yeop, Hanis Liyana Mohmad Ameran, Herdawatie Abdul Kadir, Siti Zarina Mohd Muji, Jaysuman Pusppanathan

  • PDF 1258
  • Abstract View  1058

• Optimization of Alkali Treatment Condition On Tensile Properties of Kenaf Reinforced Polyester Composite Using Response Surface Method

  Mohd Hilmi Othman, Mohd Yussni Hashim, Azriszul Mohd Amin, Ng Chuan Huat, Omar Mohd Faizan Marwah, Muhammad Akmal Johar, Ezazul Fahmee Ahmad Jamal

  • PDF 890
  • Abstract View  796

• Electric Power generation crisis in Nigeria: A Review of causes and solutions

  Ikuobase Emovon, Olusegun David Samuel, Chinedum Ogonna Mgbemena, Michael Kanisuru Adeyeri

  • PDF 2767
  • Abstract View  1800

• Lifetime Analysis on Centrifugal ID Fan Foundation in Cement Plants

  Hamid Eskandari-Naddaf, Morteza Gharouni-Nik, Amir Pakzad

  • PDF 999
  • Abstract View  480

• Leachate Treatment Using Up-Flow Anaerobic Sludge Blanket System

  Mohd Baharudin Ridzuan, Zawawi Daud, Zulkifli Ahmad, Ab Aziz Abd Latiff, Halizah Awang

  • PDF 695
  • Abstract View  650

• Performance Evaluation of User Independent Score Normalization Based Quadratic Function in Multimodal Biometric

  NORDIANA MUKAHAR, Bakhtiar Affendi Rosdi

  • PDF 533
  • Abstract View  451

• Parallel Processing of Image Segmentation Data Using Hadoop

  Nishat Akhtar, Junita Mohamad Saleh, Clemens Grelck

  • PDF 939
  • Abstract View  733

• Gas Chromatography Analysis of a C1-C5 Hydrocarbon Column

  Rais Hanizam Madon, Mas Fawzi, Shahrul Azmir Osman, Ahmad Jais Alimin, Mohd Azahari Razali, Muhamad Khairul Ilman Sarwani, Zulhelmy ZinilAbeden

  • PDF 1033
  • Abstract View  1082

• Numerical Simulation in Transient Flow of Non-Newtonian Fluid in Nozzles

  Azmahani Sadikin, Mohd Khairul Anam Mohd Bahrin, Azzura Ismail, Al Emran Ismail, Sufizar Ahmad, Salihatun Md Salleh, Mohd Nasrull Abdol Rahman, Azwan Sapit, Sallehuddin Shah Ayop

  • PDF 992
  • Abstract View  1053

• A Novel Approach for Adsorption of Copper(II) Ions from Wastewater Using Cane Papyrus

  Mohammed jaafar Al-atabi

  • PDF 644
  • Abstract View  495

• Investigation of the Bearing Capacity of Foundations on Encased Stone Columns Using Finite Element Method

  Hassan Kardgar

  • PDF 1151
  • Abstract View  679

• TiO2 Based Dye-Sensitized Solar Cell Prepare by Using Spray Pyrolysis Deposition (SPD)

  Syafa Syahirah Taib, Mohd Khairul Ahmad, Nafarizal Nayan, Fariza Mohamad, Soon Chin Fong, Amira Saryati Ameruddin, Faridah Abu Bakar

  • PDF 614
  • Abstract View  598

• High performance 8-bit approximate multiplier using novel 4:2 approximate compressors for fast image processing

  Fatemeh Ranjbar, Yahya Forghani, Davoud Bahrepour

  • PDF 964
  • Abstract View  750

• A Comparative Study of Turbulence Models on Aerodynamics Characteristics of a NACA0012 Airfoil

  Azmahani Sadikin, Nurul Akma Mohd Yunus, Saiful Anuar Abd Hamid, Al Emran Ismail, Salihatun Md Salleh, Mohd Nasrull Abdol Rahman, Shahruddin Mahzan, Sallehuddin Shah Ayop

  • PDF 4090
  • Abstract View  2659

• Thermal Gradient Pattern of Shallow Pitting Via Active Thermography – Hot Water and Steam.

  Maznan bin Ismon, Al Emran bin Ismail, Muhd. Hafeez bin Zainulabidin, Fazimah binti Mat Noor, Hanani binti Abd Wahab, Zaleha binti Mohamad, Mohd Amran bin Madlan

  • PDF 469
  • Abstract View  514

• Application of response surface methodology (RSM) to optimize COD and ammoniacal nitrogen removal from leachate using moringa and zeolite mixtures

  Zawawi Daud, Mahmoud Hijab Abubakar, Mohd Arif Rosli, Mohd Baharudin Ridzuan, Halizah Awang, Ruwaida Aliyu

  • PDF 948
  • Abstract View  1160

• Investigate How Construction Waste Generation Rate is Different for Every Types of Project in Peninsular Malaysia using Site Visit Method

  Shivaraj Subramaniam, Abd Halid Abdullah, Sasitharan Nagapan, Kumanan Kupusamy, Haritharan Manian, Zawawi Daud

  • PDF 1203
  • Abstract View  1115

• Detecting Beef Tallow adulteration in Palm Oil with NIR Spectroscopy and Chemometrics Analysis

  Mohd Fared Abdul Khir

  • PDF 686
  • Abstract View  551

• Automated Feature Description of Renal Size Using Image Processing

  Musab Sahrim

  • PDF 509
  • Abstract View  1053

• Machinery/service system Scheduled Replacement time determination: A combine Weighted Aggregated Sum Product Assessment, Additive Ratio Assessment and Age Replacement Model approach

  Ikuobase Emovon, Chinedum Mgbemena

  • PDF 790
  • Abstract View  739

• The Development of Expeller for Kernel based Seed and its Oil Characterization

  Olusegun David SAMUEL, Ikuobase Emovon

  • PDF 893
  • Abstract View  630

• Automated Feature Description of Follicle Size in Assisted Reproductive Treatment

  Irneza Ismail

  • PDF 424
  • Abstract View  343

• Automatic feature description of Endometrioma in Ultrasonic images of the ovary

  Wan Zakiah Wan Ismail

  • PDF 493
  • Abstract View  409

• Crushing Performances of Axially Compressed Woven Kenaf Fiber Reinforced Cylindrical Composites

  Al Emran Ismail, Azamahani Sadikin, Mohd Nasrull Abdol Rahman, Shahruddin Mahzan, Salihatun Md. Salleh, Sufizar Ahmad, Mohd Baharudin Ridzuan

  • PDF 751
  • Abstract View  807

• Influence of Silver (Ag) Addition on the Morphological and Thermal Characteristics of NiO-SDC Carbonate Composite Anode

  Ng Kei Hoa, Hamimah Abd.Rahman, Mahendra Rao Somalu

  • PDF 677
  • Abstract View  481