Vol. 13 No. 1 (2022)

Published: 16-05-2022

Use of Lawsonia Inermis and Sodium Nitrite as Surface Applied Corrosion Inhibitors

Nishant Kumar, Sunil Saharan

1-8
- PDF 1191
- Abstract View 657
Mechanical and Durability Properties of Foamed Concrete with the Addition of Oil Palm Trunk Fibre

Md Azree Othuman Mydin

9-24
- PDF 1055
- Abstract View 599
Design and Analysis of a Passive Lighting Device for a Sustainable Office Environment in Hot-Arid Climate Conditions

Safa Daich, Mohamed Yacine Saadi, Ahmed Motie Daiche

25-38
- PDF 1105
- Abstract View 799
Climatic Influence on Slope Failure: A Case Study at Kem Terendak, Melaka

Raazlizam Lias, Ismacahyadi Bagus Mohamed Jais, Diana Che Lat

39-49
- PDF 2558
- Abstract View 885
Shear Strengthening Behavior of Reinforced Concrete Beam Using Non-Stressing Strands

Heri Kasyanto, Ambar Susanto, Susilahadi, Enung

50-56
- PDF 881
- Abstract View 506
Investigation on Soil Strength and Microstructure of Palm Oil Boiler Ash with Sodium Hydroxide and Sodium Silicate as Alkaline Solution

Atiqah Najwa Zainuddin, Mazidah Mukri, Norbaya Sidek

57-67
- PDF 1072
- Abstract View 781
Using Waste Ceramic Dust in Stabilization of Clay Soils

Saya Abdullah Saber, Anoosheh Iravanian

68-80
- PDF 1626
- Abstract View 1338
The Influence of Industrial Steel Waste on Slump Test and Compressive Strength in Eco-Friendly Concrete Fabrication

Vijaya Prakash Vijayasree, Wan Lutfi Wan Johari

81-86
- PDF 808
- Abstract View 766
Research on Resistance to Sulfate and Chloride of Reinforced Metakaolin-Based Geopolymers

Yurdakul Aygörmez, Orhan Canpolat

87-101
- PDF 1012
- Abstract View 681
Bibliometric Analysis of Post-Occupancy Evaluation (POE): Current Status, Development, and Future Research Directions

Wan Nor Faezah Wan Mustaffa, Adi Irfan Che Ani, Afifuddin Husairi Hussain

102-120
- PDF 1171
- Abstract View 986
Influence of Cement Dose on the Durability of Structures in Stabilized Compressed Earth Blocks

Sinko Banakinao, Soviwadan Drovou, Kodjo Attipou

121-129
- PDF 831
- Abstract View 608
Bond Strength Behavior in Rubberized Concrete

Hussein Al-Quraishi, Khudhayer Najim Abdullah Kammash, Zinah Asaad Abdul-Husain

130-136
- PDF 860
- Abstract View 531
Possibilities of Using Prefabricated Modular Panels for Building NZEB Buildings in Earthquake-Affected Areas in Croatia – Case Study

Hana Begic, Hrvoje Krstic

137-148
- PDF 923
- Abstract View 722
Knowledge Management Factors Affecting Construction Project Performance Model

Eman Mohammed Abdulrahman Alhammadi; Rozilah Kasim; Sonia Lohana

149-158
- PDF 1204
- Abstract View 953
Experimental Study on the Use of the Modifying Agent for Expansive Soil Stabilization: Mockup Test on a Case Study

Dang Hoang Minh, Nguyen Thi Nien

159-166
- PDF 814
- Abstract View 491
Physical and Chemical Characterization of Coffee Husk Ash Effect on Partial Replacement of Cement in Concrete Production

Werku Koshe Hareru, Firew Belayneh Asfaw, Tewodros Ghebrab

167-184
- PDF 1842
- Abstract View 2230
Evaluation of Indonesia's Conventional Track Performance Based on Mechanistic Approach

Dian M. Setiawan

185-201
- PDF 1012
- Abstract View 791
Damage Parameter Variations of Breakwater along with a Floating Wave Barrier and a Submerged Obstacle

Alireza Naseri, Ramin Vafaeipour Sorkhabi, Mohammad Taghi Alami, Alireza Mojtahedi

202-217
- PDF 1426
- Abstract View 778
Thermal Performance and Energy Efficiency of Different Types of Walls for Residential Building

Hanizam Awang, Ying Yi Tan, Mohd Hafizal Mohd Isa

218-231
- PDF 1628
- Abstract View 736
A comparative study on Light Gauge Member and Castellated Beam

vanathi v, Venkatraman, B. Gokul Balaji

232-242
- PDF 827
- Abstract View 541
Use of Quarry Dust in the Binding Mortar and its Effect on Mechanical Characteristics of Brick Masonry

Kosalya , Arvinthan, Sathiparan Navaratnarajah

243-256
- PDF 684
- Abstract View 602
Recycled Aggregates Production Through Economic Perspectives

Kirati Nitichote, Wanchai Yodsudjai

257-263
- PDF 919
- Abstract View 616
Numerical Studies on CFRP Strengthened Cold formed Steel built-up Columns

Nahushananda chakravarthy H G, Jahnavi S J, Sivakumar Naganathan

264-272
- PDF 822
- Abstract View 596
An Attempt to Maximize the Use of Used Cooking Oil and Fly Ash in the Production of Green Roofing Tile

Wei Ping Teoh, Swee Yong Chee, Noor Zainab Habib, Choon Aun Ng

273-281
- PDF 823
- Abstract View 598

Vol. 13 No. 1 (2022)

Use of Lawsonia Inermis and Sodium Nitrite as Surface Applied Corrosion Inhibitors

Mechanical and Durability Properties of Foamed Concrete with the Addition of Oil Palm Trunk Fibre

Design and Analysis of a Passive Lighting Device for a Sustainable Office Environment in Hot-Arid Climate Conditions

Climatic Influence on Slope Failure: A Case Study at Kem Terendak, Melaka

Shear Strengthening Behavior of Reinforced Concrete Beam Using Non-Stressing Strands

Investigation on Soil Strength and Microstructure of Palm Oil Boiler Ash with Sodium Hydroxide and Sodium Silicate as Alkaline Solution

Using Waste Ceramic Dust in Stabilization of Clay Soils

The Influence of Industrial Steel Waste on Slump Test and Compressive Strength in Eco-Friendly Concrete Fabrication

Research on Resistance to Sulfate and Chloride of Reinforced Metakaolin-Based Geopolymers

Bibliometric Analysis of Post-Occupancy Evaluation (POE): Current Status, Development, and Future Research Directions

Influence of Cement Dose on the Durability of Structures in Stabilized Compressed Earth Blocks

Bond Strength Behavior in Rubberized Concrete

Possibilities of Using Prefabricated Modular Panels for Building NZEB Buildings in Earthquake-Affected Areas in Croatia – Case Study

Knowledge Management Factors Affecting Construction Project Performance Model

Experimental Study on the Use of the Modifying Agent for Expansive Soil Stabilization: Mockup Test on a Case Study

Physical and Chemical Characterization of Coffee Husk Ash Effect on Partial Replacement of Cement in Concrete Production

Evaluation of Indonesia's Conventional Track Performance Based on Mechanistic Approach

Damage Parameter Variations of Breakwater along with a Floating Wave Barrier and a Submerged Obstacle

Thermal Performance and Energy Efficiency of Different Types of Walls for Residential Building

A comparative study on Light Gauge Member and Castellated Beam

Use of Quarry Dust in the Binding Mortar and its Effect on Mechanical Characteristics of Brick Masonry

Recycled Aggregates Production Through Economic Perspectives

Numerical Studies on CFRP Strengthened Cold formed Steel built-up Columns

An Attempt to Maximize the Use of Used Cooking Oil and Fly Ash in the Production of Green Roofing Tile

info

index

journalsofuthm

Flag